CGF-5C Malleable Iron Suspension Clamp Bakeng sa Lisebelisoa tsa Motlakase oa Motlakase
Products Parameter
| Lebitso la sehlahisoa | Socket eye / Insulator end fittings | ||||||
| Mmala | Sliver | ||||||
| Nako ea thomello | Bongata | ||||||
| Tšebeliso | Karolo ea ho qetela ea insulator likhoeleng tsa likhoele tsa phetiso | ||||||
| OEM / ODM | Tšebeletso ea ho Itloaetsa e Fanoe | ||||||
| Malleable Iron Suspension Clamp Bakeng sa Lisebelisoa tsa Motlakase oa Motlakase | |||||||
| Lintlha tsa Motheo | |||||||
| Mofuta | Mofuta o lekanang | Likarolo tse kholo (mm) | Moroalo oa tšenyo ea lebitso (kN) | ||||
| H | L | R | C | M | |||
| CGH-2 | Φ7.0-12.4 | 60 | 146 | 9 | 19 | 16 | 40 |
| CGH-3 | Φ12.4-17.0 | 65 | 200 | 11 | 22 | 16 | 40 |
| CGH-4 | Φ19.0-21.5 | 70 | 220 | 12 | 28 | 16 | 40 |
| CGH-5 | Φ24.2-33.0 | 85 | 250 | 18 | 37 | 16 | 70 |
| CGH-6 | Φ34.0-45.0 | 90 | 300 | 23 | 48 | 16 | 70 |
| Lisebelisoa tsa matla ke lisebelisoa tsa tšepe tse kopanyang le ho kopanya lisebelisoa tse sa tšoaneng tsamaisong ea matla le ho phetha karolo ea ho fetisetsa mojaro oa mechine, mojaro oa motlakase le tšireletso e itseng. The suspension clamp e sebelisoa haholo-holo ho lokisa li-conductor ho khoele ea insulator kapa ho fanyeha li-conductor tsa mabone holim'a litora tse otlolohileng.Moveover, e ka boela ea sebelisoa bakeng sa litora tsa transposition ho ts'ehetsa li-conductors tsa transposition le litora tsa tsitsipano kapa lipalo tsa angle ho lokisa lithapo tsa jumper. | |||||||
Lintlha tsa Sehlahisoa
Setlapa sa ho emisa se sebelisetsoa ho tlama mabanta a aluminium kapa litšepe tse sireletsang terata ka ntle ho lithapo tse tsamaisang ha ho raloa thapo ea aluminium.
'Mele oa clamp le bahlokomeli ke motsoako oa aluminium.
Cotter-pin ke tšepe e sa hloekang.
Likarolo tse ling ke tšepe le hot-dip galvanized.
Li-clamp tsa ho emisa li sebelisoa haholo-holo bakeng sa lithapo tsa motlakase tse holimo.Lithapo li fanyehiloe ho li-insulators kapa li-conductor tsa lehalima li fanyehiloe litorang tsa lipalo ka li-fittings tsa khokahano.
Li-clamps tsa tšepe tse ka tšeptjoang tsa setso li na le bofokoli ba tahlehelo e kholo ea hysteresis, tahlehelo e kholo ea sekoti, le lihlahisoa tse ngata.Aluminium alloy clamp e na le melemo ea tahlehelo e nyane haholo ea hysteresis le tahlehelo ea hona joale ea eddy, boima bo bobebe le kaho e bonolo.E kopana le ditlhoko tsa ho baballa eneji le phokotso ya tshebediso ya phetolo le kaho ya keriti ya naha ya motlakase.
Ha thapo e emisitsoeng e sebelisoa bakeng sa terata e kholemisitsoeng ea aluminium le terata ea tšepe ea mantlha ea aluminium, e ka phutheloa ka sheathing ea aluminium kapa terata e sireletsang ho sireletsa terata.Bophara ba ka ntle bo sebetsang ba terata bo kenyelletsa liphutheloana.
